Danuser Post-Driver

Hammer SM40 with Tilt

Drives fence posts, sign posts, guard rails, median dividers, tent stakes, T-posts, pipe fence, and railroad ties with ease. Model SM40 has a 40” drop hammer design. With this innovative design, you can achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth. The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the skid-steer seat. Tilt option allows up to 20˚ in each direction. The hammer weight is 300 lbs. from the factory. Additional weight can be added for a total of 500 lbs.

Features

Specifications

Specifications

Post Dimensions: T-post to RR Tie
Impact Force: 82,000 lbs.
Length of Stroke: 40
Hammer Weight: 300
Strokes per Minute: 35

Model SM40

Overall Length 45.5"
Overall Width 25"
Overall Height 64"
Tilt (side-side) N/A
Machine Weight 915 lbs (1,115 lbs w/ additional weight)
Hammer Weight 300 LBS (500 LBS MAX)
Length of Stroke 40"
Max. Strokes per Minute 35
Hydraulic Requirements 1500-3000 PSI
*12-30 GPM
Maximum Post Width 8.5" x 9.25"
Impact Force 82,000 lbs @ 500 lb weight
Impact Energy 1,025 ft-lbs @300 lb weight;
1,709 ft-lbs @ 500 lb weight
*Hammer will still operate on machines with less than 12 GPM with fewer strokes per minute.

Accessories and Attachments

CONTACT US

ADDRESS
Connect Services,
36428 US HWY 69N Jacksonville Texas 75766
PHONE
903-586-8999
After Hours
903-721-3695
Business Hours
Mon-Fri / 8am - 5pm
FAX
903-541-2209
EMAIL
Info@connectrow.com