.jpg)
T3 Post Driver
T3 Post Driver
The T3 Post Driver is a small driver that delivers big time results! The T3 Driver will drive T-posts up to a 3" O.D. (outside diameter) pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. We offer several mounting options, including an offset skid-steer quick attach which allows the operator to drive parallel to the fence line, a bolt-on/weld-on bracket that mounts to almost any flat surface, and a tilt bracket for up to 20° adjustments left or right. Use down pressure from the host vehicle to drive more posts in the ground faster. The T3 Driver includes one bolt-on/weld-on bracket, hoses and flat face ISO couplers for simple plug and play operation. This is an ideal post driver for most farmers, ranchers, fencing contractors, and rental yards.Features
Specifications
| Post Dimensions: |
T-post to 3" O.D. pipe
|
|---|---|
| Impact Force: |
2,000 lbs. per stroke
|
| Impact Energy: |
40 ft.-lbs. per stroke
|
| Hammer Weight: |
10 lbs.
|
| Strokes Per Second: |
6
|
T3 Driver
| Overall Depth |
12"
|
|---|---|
| Overall Width |
11"
|
| Overall Height |
17"
|
| Weight |
86 lbs.
|
| Hydraulic Requirements |
1500-3000 PSI & Up to 30 GPM*
|
Skid‑Steer
| Overall Depth |
14"
|
|---|---|
| Overall Width |
45.5"
|
| Overall Height |
19"
|
| Weight |
173 lbs.
|
| Hydraulic Requirements |
1500-3000 PSI & Up to 30 GPM*1500-3000 PSI & Up to 30 GPM*
|
Skid‑Steer Offset
| Overall Depth |
18"
|
|---|---|
| Overall Width |
Extendable 50.5"-86.5"
|
| Overall Height |
19"
|
| Weight |
286 lbs.
|
| Hydraulic Requirements |
1500-3000 PSI & Up to 30 GPM*
|
Euro/Global
| Overall Depth |
16"
|
|---|---|
| Overall Width |
45"
|
| Overall Height |
21"
|
| Weight |
181 lbs.
|
| Hydraulic Requirements |
1500-3000 PSI & Up to 30 GPM*
|
John Deere 200-500 Series
| Overall Depth |
15"
|
|---|---|
| Overall Width |
49"
|
| Overall Height |
24"
|
| Weight |
193 lbs.
|
| Hydraulic Requirements |
1500-3000 PSI & Up to 30 GPM*
|
| * T3 Driver will operate at 6 strikes per second on vehicles with 15-30 GPM. It will function at fewer strikes per second below 15 GPM. |
|
Accessories and Attachments
Front-End Loader Hose Kit
1/2” hose kit, 25’ long, with flat face ISO couplers and pioneer couplers. Mounting bracket included for bolting or welding. Hardware not included.
Tilt Bracket Assembly
Tilt left or right up to 20°. T-Handle design with lockout feature. Hardware included. Works with all T3 Driver mount platforms.
Mount Bracket
Bolt-on/weld-on bracket that mounts to a flat surface.
Plumb Bob
Provides vertical line reference for operator.
CONTACT US
ADDRESS
Connect Services,
36428 US HWY 69N Jacksonville Texas 75766
36428 US HWY 69N Jacksonville Texas 75766
PHONE
903-586-8999
After Hours
903-721-3695
Business Hours
Mon-Fri / 8am - 5pm
FAX
903-541-2209
Info@connectrow.com