MODEL 156 Chisel Plow
7' Athens Chisel Plow 3 Point
STANDARD EQUIPMENT
- Tine Size – See Optional Equipment
- Tine Spacing - 12"
- Chisel Points - 5/8"
- Clearance, Frame to Point - 26" or 32"
- 2 Bar Extension Widths - 2' or 4'
- 3 Bar Extension Widths - 2', 4', or 6'
- Hitch – Category I, II, or III
OPTIONAL EQUIPMENT
- Tines:
1" x 2" x 26"
1" x 2" x 32"
1.25" x 2" x 32" - Rigid or Spring Tine Attaching
EXTRA EQUIPMENT
- 3/8 " Twisted Shovel
- 2' or 4' EXTRA Extensions - 2 Bar Units
- 2', 4', or 6' Extensions - 3 Bar Units
- 15" Gauge Wheels, Adjustable
- Quick Coupler Adaptors - Category II & III
Features
is constructed of structural 4" x 4" steel tubing welded into a unitized one-piece frame. All high stress areas are reinforced to resist bending and twisting.
between the chisel point and the bottom of the frame is 26" or 32" depending on the tine size.
Tines are mounted 24" apart on the 2 Bar units and 36" apart on the 3 Bar units. Then they are staggered from front to rear with a spacing from the center of the unit yielding a 12" pattern.
are used where rocks are not a problem. Available on 5' and 7' 2-Bar units only.
feature dual springs made of ½" oil tempered steel for strength and durability. The spring mounts are cast with internal and external helicals that match the ends of the springs. As the spring is stressed, the load is distributed evenly out the entire length of the spring. This distribution aids in avoiding stress concentrations.
Specifications
2 BAR BASE
| WIDTH OF CUT |
NUMBER OF TINES
|
|---|---|
| 5' |
5
|
| 7' |
7
|
| 11' |
11
|
| TINE SPACING |
EXTENSION WIDTHS
|
|---|---|
| 12 |
2' or 4'
|
| 12 |
2' or 4'
|
| 12 |
2' or 4'
|
| **APPROX WEIGHT (lbs) |
**APPROX HP
|
|---|---|
| 737 |
50
|
| 994 |
70
|
| 1,573 |
110
|
3 BAR BASE
| WIDTH OF CUT |
NUMBER OF TINES
|
|---|---|
| 7' |
7
|
| 10' |
10
|
| TINE SPACING |
EXTENSION WIDTHS
|
|---|---|
| 12 |
2', 4', or 6'
|
| 12 |
2', 4', or 6'
|
| **APPROX WEIGHT (lbs) |
**APPROX HP
|
|---|---|
| 1,208 |
125
|
| 1,628 |
100
|
| *Approximate weight calculated using Spring Tine Attachment with 32" Tines and no Extensions. |
|
| **Approximate horsepower (HP) is only given as a guide. Extremely hard, soft, hilly, or boggy conditions will change these figures. |
|
Accessories and Attachments
CONTACT US
ADDRESS
Connect Services,
36428 US HWY 69N Jacksonville Texas 75766
36428 US HWY 69N Jacksonville Texas 75766
PHONE
903-586-8999
After Hours
903-721-3695
Business Hours
Mon-Fri / 8am - 5pm
FAX
903-541-2209
Info@connectrow.com