Equipment Rentals

• Dedicated quick attach skid loader mounting
• Installs silt fence either going forward with a skid loader or backwards
• Offsets 51″ from the center of the plow when going forward
• Can offset in the pull position 24″ or 42″ from the center of the plow in the pull position
• 36″ fabric chute installs 36″ and shorter fabric
• 48″ fabric chute installs 48″ and smaller fabric
• 1″ Thick mole board knife
• Replaceable 2″ wide hardened self sharpening cutting tip
• Spring loaded hardened 16″ diam. cutting coulter to cut through soil, trash, tree roots
• Grade 8 5/8″ x 4″ shear bolt protection
• Forklift / hoist slots for easy moving
• Rear Pivot has a 90 degree swing to either side of center for tight turning
• Massive 2″ x 8″ greasable pivot pins
• Simple swing dampening brake with adjustable tension setting to keep the rear pivot from slapping when in transport position – no springs to wear out or break
• 6″ x 4″ x 3/8″ structural steel main beam construction
• Up to 1500′ rolls of silt fence material can be used
• fabric tension spring with 16″ diameter fabric plate
• Can install silt fence 6″ to 20″ deep. The depth needed to install silt fence material is determined by the specs of the job and soil conditions. Most contractors install silt fence 8″ – 10″ deep.
• Retractable storage legs with pads fro stability
• 36″ Push Pull model weight 995 #s and 48″ model weighs 1121 #s

Herd’s model 750‐3PT Broadcaster is ideal for category 1 tractors. With ITS convenient 750# capacity, the 750‐3pt works well for smaller acreage jobs in farms, orchards or groves, schools or parks. The rugged fan assembly provides consistent seeding for most any material.

Drives fence posts, sign posts, guard rails, median dividers, tent stakes, T-posts, pipe fence, and railroad ties with ease. Model SM40 has a 40” drop hammer design. With this innovative design, you can achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth. The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the skid-steer seat. Tilt option allows up to 20˚ in each direction. The hammer weight is 300 lbs. from the factory. Additional weight can be added for a total of 500 lbs.

Don’t let the size of this vibrating post driver fool you! This unit packs more of a punch than most skid steer hammer style drivers on the market. By using hydraulic orbital technology, the Blue Diamond Vibrating Post Driver for skid steers uses your machine’s auxiliary flow in the most efficient way.

The T3 Post Driver is a small driver that delivers big time results! The T3 Driver will drive T-posts up to a 3″ O.D. (outside diameter) pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. We offer several mounting options, including an offset skid-steer quick attach which allows the operator to drive parallel to the fence line, a bolt-on/weld-on bracket that mounts to almost any flat surface, and a tilt bracket for up to 20° adjustments left or right. Use down pressure from the host vehicle to drive more posts in the ground faster. The T3 Driver includes one bolt-on/weld-on bracket, hoses and flat face ISO couplers for simple plug and play operation. This is an ideal post driver for most farmers, ranchers, fencing contractors, and rental yards.

The SGC1560, SGC1572 & SGC1584 Claw Grapples make quick work of large jobs, and can be used to rake, dig, and move rocks, trees, brush, and construction debris without picking up dirt. The compact design minimizes weight while preserving lift capacity.

Kodiak’s durable Rock Buckets suit a variety of landscaping needs. Universal hookup that will fit most tractor front end loaders. Available in 60″ or 72″ widths.