T Post Driver

T3 Driver

The T3 Post Driver is a small driver that delivers big time results! The T3 Driver will drive T-posts up to a 3" O.D. (outside diameter) pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. We offer several mounting options, including an offset skid-steer quick attach which allows the operator to drive parallel to the fence line, a bolt-on/weld-on bracket that mounts to almost any flat surface, and a tilt bracket for up to 20° adjustments left or right. Use down pressure from the host vehicle to drive more posts in the ground faster. The T3 Driver includes one bolt-on/weld-on bracket, hoses and flat face ISO couplers for simple plug and play operation. This is an ideal post driver for most farmers, ranchers, fencing contractors, and rental yards.





Post Dimensions: T-post to 3" O.D. pipe
Impact Force: 2,000 lbs. per stroke
Impact Energy: 40 ft.-lbs. per stroke
Hammer Weight: 10 lbs.
Strokes Per Second: 6

Overall Depth

T3 Driver 12"
Skid‑Steer 14"
Skid‑Steer Offset 18"
Euro/Global 16"
John Deere 200-500 Series 15"

Overall Width

T3 Driver 11"
Skid‑Steer 45.5"
Skid‑Steer Offset Extendable 50.5"-86.5"
Euro/Global 45"
John Deere 200-500 Series 49"

Overall Height

T3 Driver 17"
Skid‑Steer 19"
Skid‑Steer Offset 19"
Euro/Global 21"
John Deere 200-500 Series 24"


T3 Driver 86 lbs.
Skid‑Steer 173 lbs.
Skid‑Steer Offset 286 lbs.
Euro/Global 181 lbs.
John Deere 200-500 Series 193 lbs.

Hydraulic Requirements

T3 Driver, Skid‑Steer, Skid‑Steer Offset, Euro/Global, John Deere 200-500 Series 1500-3000 PSI & Up to 30 GPM*

* T3 Driver will operate at 6 strikes per second on vehicles with 15-30 GPM. It will function at fewer strikes per second below 15 GPM.

Accessories and Attachments

Front-End Loader Hose Kit

1/2” hose kit, 25’ long, with flat face ISO couplers and pioneer couplers. Mounting bracket included for bolting or welding. Hardware not included.

Tilt Bracket Assembly

Tilt left or right up to 20°. T-Handle design with lockout feature. Hardware included. Works with all T3 Driver mount platforms.

Mount Bracket

Bolt-on/weld-on bracket that mounts to a flat surface.

Plumb Bob

Provides vertical line reference for operator.


Jacksonville Office,
36428 US HWY 69N Jacksonville Texas 75766
Tyler Office,
17469 US 69, Tyler, Texas 75703
Tyler Office:
Jacksonville Office:
After Hours

Business Hours
Mon-Fri / 8am - 5pm