Farm Tractor Attachment Rentals

• The Great Plains 606NT Pull-Type No-Till Drill’s compact design is ideal for seeding into everything from pasture renovations to food plots. It features nine 06 Series Openers and a choice of 5/16″ fluted or 5/8″ Turbo Coulter blade options. The drill’s end wheel design reduces sideloading when operating on contours and curves, eliminating premature opener wear.
• Other features combine to create a system designed for long-term dependability. These include heavy-duty coulters, an easy-to-access calibration crank, a central grease bank, lockout hubs for transport, and optional weight brackets.
• The 606NT comes standard with a 12-bushel capacity main seed box. Additional seed boxes include a 1.44-bushel small seeds box or a 6-bushel native grass box for increased productivity across a broad range of seeding applications.

• The Great Plains 3P1006NT is a 2-Point Mounted No-Till Drill with lift assist wheels to ensure safe operation and transport.
• It utilizes the 06 Series Openers to properly place seed. The coulters are pre-loaded to 450 pounds to ensure proper penetration, even in the toughest conditions. The spring pre-load coulter design adds stability and improved tracking on slopes. Our double disk configuration and full length seed tube ensures that the seed is placed consistently at the chosen depth. Additional seed tubes are used to place both native grass and small seeds. This allows three different seeds to be planted at separate rates and different depths at the same time. Depth control is handled by the 18-position T-handle press wheel adjustment.
• The main seedbox is a fluted feed design. The seeding rate is set with the four speed transmission and the adjustable gate opening. The optional native grass box uses our proven “picker wheel” to meter the seed. Rates are adjusted by varying the speed of the drive. Lastly the optional small seeds attachment is a smaller version of our fluted feed system, and seeding rates are set by changing the opening of the fluted feed. The ground drive system automatically disengages when lifted, simplifying the unit and enhancing its reliability.

KING KUTTER’S SEEDER\SPREADER gives new meaning to the word adaptable. With this one tool you can spread seed, granular fertilizer, crystalline herbicides, pesticides and sand. Plus you can choose from three different spreading patterns; predominately left, predominately right, or left and right. The seamless all steel seeder\spreader is strong enough to endure rough handling and heavy use. The heat treated paint resists corrosion caused by chemicals and moisture. Each unit comes standard with a rotating agitator and gearbox with shielded drive line.

Bowie’s Crimp-Disc is not like the lightweight crimpers. Crimp-Discs made by Bowie are “Built-Strong…Built to Last” and are used to anchor straw and hay mulch into the soil. The vertical fibers, in rows six inches apart, form a fence that will protect the other mulch fibers from wind. Each vertical standing straw is available to carry moisture into the soil to aid in seed germination. This method is a fraction of the cost of other methods. In high wind areas, this method has proven to be the most effective.

• Quadraseal Ball Bearings
• Rigid Bearing Hangers with Wear Guards
• Disc Blades, 22” or 24” Smooth or Cutout
• 1 1/4” Cold Rolled Square Axle
• Spacing, 71/2”, 9”, or 9” Front and 7 1/2” Rear
• Single Tapered Disc on Front
• Double Tapered Discs on Rear
• Adjustable Cutting Angle, 15° or 19°
• Cover Discs with Scrapers
• Six Lug Wheel Hubs and Rims
• Self Leveling Frame
• Lifting and Folding Hydraulics
• Reversible Tongue Clevis
• Gang Wrench and Tongue Jack

STANDARD EQUIPMENT

• Disc – 24″ Diameter (127) & 26″ Diameter (167)
• 1 ½” Square Steel Axle
• Relube QUADRASEAL Ball Bearings or Relube QUADRASEAL Tapered Roller Bearings
• Adjustable Angle of Cut – 13° – 25°
• Rigid Bearing Hangers w/ Wear Plates
• Heavy-Duty Scrapers
• Tapered Disc Gangs
• Extra Disc on Rear Gang
• Cover Disc with Scrapers
• Reversible Tongue Clevis
• Complete Hydraulics – Lifting & Leveling
• Gang Wrench and Tongue Jack
• Mechanical Transport

EXTRA EQUIPMENT

• Manual Leveling
• Spring Bearing Hangers w/ Wear Plates
• Dual Wheels

STANDARD EQUIPMENT

• 1 1/2″ Cold Rolled Square Gang Axle
• Double Tapered Roller Bearings
• Rigid or Spring Bearing Hangers with Wear Guards
• Disc Blades, 24″ Diameter C/O or SM
• Disc Spacing, 9 1/2″
• Dual Wheels
• Lifting Hydraulics
• Heavy-Duty Tube Mounted Scrapers
• Cover Discs with Scrapers
• Self-Leveling Frame
• Mechanical Transport
• Reversible Tongue Clevis
• Gang Wrench and Tongue Jack

STANDARD EQUIPMENT

• Tine Size – See Optional Equipment
• Tine Spacing – 12″
• Chisel Points – 5/8″
• Clearance, Frame to Point – 26″ or 32″
• 2 Bar Extension Widths – 2′ or 4′
• 3 Bar Extension Widths – 2′, 4′, or 6′
• Hitch – Category I, II, or III

OPTIONAL EQUIPMENT

• Tines:
  1″ x 2″ x 26″
  1″ x 2″ x 32″
  1.25″ x 2″ x 32″
• Rigid or Spring Tine Attaching

EXTRA EQUIPMENT

• 3/8 ” Twisted Shovel
• 2′ or 4′ EXTRA Extensions – 2 Bar Units
• 2′, 4′, or 6′ Extensions – 3 Bar Units
• 15″ Gauge Wheels, Adjustable
• Quick Coupler Adaptors – Category II & III

• Points are heat treated to exacting specifications. Staggered shanks help prevent trash build up. Shanks set on 15″ centers. Coulters are 17 inches and can be adjusted up ord down.
• Sheer bolts protect shanks from rocks, roots and other immovable objects.
• Six standard plow models from 3’10” to 13′.
• Requires 10 to 15 horsepower per shank depending on soil type. Category 2 hook up is standard except on 3 and 4 shank.
• Seed/fertilizer kit available and can be added to 6, 8 or 10 shank models.

• Standard stump jumper blade holder
• Dome-shaped top deck is smooth and easy to clean
• 3-point hitch hookup provides more strength
• Front and rear chain shields offer safety